资讯动态
  销售热线
您当前在的位置:ca88手机版登录网页 >> 资讯动态 >> 行业资讯 >> 滤油机试验报告

滤油机试验报告

发布时间:2015/5/28 21:49:47    浏览次数:3853

滤油机试验报告

TY-R200型

真空滤油机

工厂型式试验报告


Type Test Report

of TY-R200 Vacuum Oil Filter



制造单位:ca88手机版登录网页_ca88会员登录【官网入口】


Manufactured by: Chongqing Kaiqian Oil Filter Manufacture Co., Ltd.


试验单位:ca88手机版登录网页_ca88会员登录【官网入口】


Tested by: Chongqing Kaiqian Oil Filter Manufacture Co., Ltd.


      试验人员签名

        Signatures

试验人员:曾辉

Tested by:

报告编制: 杨娟      

Drafted by:

报告审核:常飞

Checked by:

试验日期   2015年 五 月  

Test date:   May, 2015    

报告日期    2015年  五 月  

Report date: May, 2015      


1..真空滤油机参数

Specifications of Tested Product

试验设备型号:TY-R200

Product type: TY-R200

功  率:90KW

Power: 90KW

总功率:98kw

Power: 98KW

电  压:380V

Voltage: 380V

频  率:50Hz

Frequency: 50Hz

额定流量:50L/min

Rated flow: 50L/min

额定压力:≤0.5Mpa

Rated pressure: ≤0.5MPa

第一级滤芯型号:不锈钢150mm×300mmX80u

1st filter element model: stainless 150mm×300mmX80u

第二级滤芯型号:不锈钢150mm×300mmX50u

2nd filter element model: stainless 150mm×300mmX50u

第三级PH高分子吸附滤芯精度: 150mm×300mmX5u

Precision of 3rd PH polymeric adsorption filter element: 150mm×300mmX5u

润滑油含水量:200PPm

Turbine oil moisture: 200PPm

进油口:2寸

Oil inlet: 2寸

出油口:英制螺纹2寸mm

Oil outlet: 2

介质温度:20-80℃

Medium temperature: 20-80℃

环境温度:23

Ambient temperature: 23

试验依据:

2.Test Standards

机械工业部JB/T5285--2001标准和电力工业部DL-T521-93标准。

油净化后质量控制指标应满足《机械工业JB/T5285--2001标准》相关要求。

TY-R50《技术条件》

TY-R50《试制鉴定大纲》

GB/T4942.2-93《低压电器外壳防护等级》进行试验,并参考GB/T10230.1-200×附录G(规范性附录)《在线滤油装置的性能要求和试验方法的补充资料》。

JB/T5285--2001 standard of Ministry of Machine-Building Industry and DL-T521-93 standard of Ministry of Power Industry.

Quality control specifications of purified oil shall conform to related regulations of JB/T5285--2001 standard of Machine Building Industry.

Technical Requirements of TY-R200 online oil filter

Appraisal Program of Trial Production of TY-R200online oil filter

Test according to GB/T4942.2-93 Degrees of Protection Provided by Enclosures for Low-Voltage Apparatus, referring to Appendix G (normative appendix) of GB/T10230.1-200×: Supplementary Materials on Performance Requirements and Test Methods of Online Filter.

3、试验内容

3.Test Items

3.1泵的特性试验:

3.1Test on bump characteristics

试验参数:额定压力:0.5MPa

工作时间:T=3h

压力控制器动作压力:N≥0.3MPa

Test parameters: rated pressure: 0.3MPa

Work hours: T=3h

Movement pressure of pressure controller: N≥0.3MPa

   滤油机在0.3MPa额定压力下,连续运行工作时间3小时,用流量计测量泵的流量应符合额定流量值(50L/min)。继续增加压力至大于0.3MPa时油泵压力控制器应动作。

After the online filter has been running for continuous 3 hours under 0.3MPa rated pressure, bump flow measured by the flowmeter shall conform to the rated flow value (50L/min). The pressure controller of oil pump shall start to operate when pressure is increased to over 0.3MPa.

试验结果:油泵的出油口流量为50L/min;当油流管路内压力至增加至0.3MPa时油泵压力控制器动作,符合TY-R50型润滑油滤油机《技术条件》的要求。

Test result: Flow at the oil pump outlet is 0 flow=50L/min; the pressure controller of oil pump shall start to operate when pressure is increased to over 0.21MPa to 0.22MPa. This conforms to Technical Requirements of TY-R50ilter on-load tap-changers online oil filter.

3.2滤油效果试验:

3.2Test on oil filtering results

试验参数:滤油前油中颗粒度:NAS1636≥12级标准

Test parameters: Oil granularity before filtering: NAS1636≥level 12 standard

滤油后油中颗粒度:NAS1638≤6级标准

Oil granularity after filtering: NAS1638≥level 6 standard

滤油前油中含水量:≥200PPM

Oil moisture before filtering: ≥200PPM

滤油后油中含水量: ≥80PPM

Oil moisture after filtering: ≥80PPM

过 滤 后 精 度 :GB/T511≤5um标准

Precision after filtering : GB/T511≤5um standard

滤油前试品油置于清洁的容器中,测定试验前油的参数为:滤油前油中颗粒度NA1638为12级标准;油中含水量为200ppm;试品油容量为300L。第一级滤芯型号:不锈钢150mm×300mm80u

Test oil is in clean container before filtering, and parameters are measured as: oil granularity before filtering: NAS1636, level 12 standard; oil moisture: 200ppm; volume: 300L. 1st filter element model: stainless 150mm×300mm80u

(除杂质滤芯)50um. 第二级滤芯型号:不锈钢150mm×300mm(除杂质滤芯)50um. 第三级PH高分子吸附滤芯精度: 150×300mm×5u

(Decontamination filter element) 50um. 2nd filter element model: stainless 150mm×300mmX50u (Decontamination filter element) 50um. Precision of 3rd PH polymeric adsorption filter element:  150Xmm×300mm5u

滤芯经过24小时的过滤之后重新对试品油进行测试鉴定其参数。

The test oil is measured again after 24 hours of the above filter elements.

试验结果:滤油后油中颗粒度:NAS1368为6-7级标准,精 度≤5um标准.油中含水量≤80ppm。因此润滑油真空滤油机的滤油效果符合TY-R200真空滤油机《技术条件》要求。

Test result: Oil granularity after filtering: NAS1368, level 6-7 standard; precision ≤5um standard; oil moisture ≤80ppm. Filtering results of the online filter conforms to the Technical Requirements ofTY-R200online oil filter.

3.3噪音试验:

3.3Noise test

设备运行时噪音距设备外廓任何一点1.0m处不得≥75dB。

Noise at 1.0m from any point of the cabinet must be lower than 75dB when the equipment is operating.

试验结果:

设备正常运行时噪音距设备外廓任何一点1.0m处≤75dB试验结果符合TY-R200滤油机技术条件要求。

Test result:

Noise at 1.0m from any point of the cabinet is lower than 75dB when the equipment is operating. This conforms to the Technical Requirements of TY-R200 filter.

3.3密封试验:

3.3Pressure test

试验参数:试验压力:PE=0.3MPa

Test parameters: Test pressure: PE=0.3MPa

工作时间:T=3h

Work time: T=3h

润滑油真空滤油机在0.3MPa额定压力的热油(70℃±10%)中,连续运行3小时后,检查油路中各管路、接头、堵头、阀门、油泵、滤芯应无渗滤现象。

After the online filter has been operating for continuous 3 hours in hot oil (70℃±10%) under rated pressure of 0.3MPa, check to make sure no percolation occurs at any pipe, joint, plug, valve, oil pump or filter element. 滤油机:www.kaiqiancq.com



上一条: 滤油机水分定性测定法         下一条: 滤油机对-变压器油中产生乙炔、氢气的原因及解决方式
产品导航: 分接开关滤油装置 | 抽真空装置 |
XML 地图 | Sitemap 地图